Spine
A spinal fixation system is a key implant to restore spinal alignment and stability for degenerative, traumatic, tumoral and infectious spinal disorders. CHENANHUI provides a full spine range, including Φ5.5 percutaneous MIS rod systems, Φ5.5/Φ6.0 open pedicle screw-rod constructs, anterior cervical plates, PEEK and titanium mesh fusion cages, occipitocervical plates, laminoplasty plates and classic AF angle-stable systems in titanium alloy and pure titanium. We cover procedures from ACDF to long-segment posterior fusion with dedicated instrument kits for each surgical approach.
Features: Φ5.5 percutaneous MIS system; 360° multi-axial break-off pedicle screws; anterior cervical locking plates; PEEK & titanium mesh fusion cages; occipitocervical and laminoplasty implants; AF angle screw system; matched dedicated instrument kits.
Features: Φ5.5 percutaneous MIS system; 360° multi-axial break-off pedicle screws; anterior cervical locking plates; PEEK & titanium mesh fusion cages; occipitocervical and laminoplasty implants; AF angle screw system; matched dedicated instrument kits.
Q1. Should I use the Ø5.5 or the Ø6.0 system?
Ø5.5 for degenerative cases and short constructs, and it is the diameter that supports the percutaneous MIS approach; Ø6.0 for long constructs, trauma and deformity where higher bending stiffness is needed.
Q2. Is the MIS system complete, or just the screws?
Complete. The Ø5.5 percutaneous system uses long multi-axial screws with an integrated tool channel, so rod placement and locking are done through the same channel; it ships with a dedicated kit.
Q3. What anterior cervical options do you have?
Pure titanium anterior cervical plates from 24 to 88 mm, with screws lockable from 0° to 12° in the sagittal plane; rescue screws are available.
Q4. Do you supply interbody cages?
Yes — PEEK cervical and lumbar cages (Type II/III/V) and titanium mesh cages ranging Ø10mm to Ø30mm.
Q5. What screw types are in the pedicle range?
U-shaped, 360° multi-axial and break-off screws, with variable-pitch, multi-start threads and a top-wire anti-dislodgement design.
For minimum order quantity, lead-time, warranty and custom-service terms, please check our General FAQ page.
Disclaimer: this category-specific FAQ is for technical reference only. For commercial terms, please visit our General FAQ.
Ø5.5 for degenerative cases and short constructs, and it is the diameter that supports the percutaneous MIS approach; Ø6.0 for long constructs, trauma and deformity where higher bending stiffness is needed.
Q2. Is the MIS system complete, or just the screws?
Complete. The Ø5.5 percutaneous system uses long multi-axial screws with an integrated tool channel, so rod placement and locking are done through the same channel; it ships with a dedicated kit.
Q3. What anterior cervical options do you have?
Pure titanium anterior cervical plates from 24 to 88 mm, with screws lockable from 0° to 12° in the sagittal plane; rescue screws are available.
Q4. Do you supply interbody cages?
Yes — PEEK cervical and lumbar cages (Type II/III/V) and titanium mesh cages ranging Ø10mm to Ø30mm.
Q5. What screw types are in the pedicle range?
U-shaped, 360° multi-axial and break-off screws, with variable-pitch, multi-start threads and a top-wire anti-dislodgement design.
For minimum order quantity, lead-time, warranty and custom-service terms, please check our General FAQ page.
Disclaimer: this category-specific FAQ is for technical reference only. For commercial terms, please visit our General FAQ.















